These are convenient, easy-to-install filters for those who do not wish to install a separate ledge faucet for purified water on their sink. They fit under the sink and filter all of the cold water that comes from the faucet. They cost less than our standard undersink filters because the separate faucet and inlet valve are not needed. They are very easy to install. No holes to drill, no faucet or inlet valve to install.
Since installations vary considerably, no fittings are supplied. We'll leave the details to your plumber or the hardware store.
The standard system has 3/8" female ports, but we'll make it in 1/2" if you ask.
The unit comes in single, double or triple versions, and all are bracket-mounted. The single unit should be wall mounted. The double and triple versions will stand independently or can be hung from a wall.
In the list below, the “default” cartridges are listed. This is what you'll get if you don't specify otherwise. You can, however, substitute cartridges. Just be sure to tell us what you want. You can also look on our Cartridge Menu for other options in the 9.75" X 2.5" section. Keep in mind that very tight cartridges, especially ceramics, don't lend themselves well to the higher flow rates of these freer flowing systems.
Note: If you want to choose alternative cartridges, just tell us what you want in the “Comments” section of the shopping cart.
Note: We pay shipping on all cartridges, and they are also subject to a volume discount.
Please call for advice if you're in doubt about cartridge selection.
(whole house & well units)
(listed by part numbers)