Fleck 5600 Filter & Softener Control Valve

The tough and reliable Fleck 5600 control valve for filters and softeners can handle flow rates up to 20 gallons per minute and is made to provide the backwash capacity for softeners up to 12" in diameter and filters up to a 10" diameter.

This page lists timer valves, which feature an easy-to-program timer that controls regeneration of the filter or softener, as well as metered valves, which measure the flow of water to determine regeneration cycles. The metered valves come in the standard Econominder style, which uses a mechanical face and is programmed with knobs and buttons, ands the SE, or Simple Electronics style, which uses electronic programming. More details upon request.

The valves listed below are of the popular "L" backplate series. Plastic yoke or stainless steel bypass valve can be ordered separately.

Important Facts about the 5600:

Valves above come without a yoke or bypass. If you need a yoke or bypass, order from the chart below.

Fleck 5600 Filter/Softener Control Valve Prices

Part#	Description	Price
BW502	Fleck 5600 Softener Valve (Timer Style)	$238.00
BW500	Fleck 5600 Filter Valve	$223.00
BW501	Fleck 5600 Econominder Valve for Softeners. Metered Valve with Mechanical Face.	$309.00
BW503	Fleck 5600 SXT Metered Electronic Valve for Softeners	$337.00

Fleck Valve Accessories

Part#	Description	Price
BW504	Plastic Yoke ending in 3/4" Male Pipe Thread, for 5600 and 2510 Filters. This is standard equipment on 5600 and 2510 filters. It will be included and added to the filter price if you don't specify another choice.	$11.00
BW506	Metal Bypass Valve ending in 3/4" Female Pipe Thread, for 5600 and 2510 Filters	$49.00
BW505	Plastic Yoke ending in 1" Male Pipe Thread, for 5600 and 2510 Filters	$11.00
BW507	Metal Bypass Valve ending in 1" Female Pipe Thread, for 5600 and 2510 Filters	$53.00