This unit is designed to connect to the end of a garden hose and feed into a second garden hose.
Attach a garden hose to a water source.
Attach the end of the hose to the “In” port of the garden hose filter. Be sure to use a hose washer.
Tip: The easy way is to remove the cap from the filter, screw it onto the hose, load the filter cartridge into the housing, then screw the cap back on.
Attach the second hose to the “Out” port of the filter.
A wrench is provided to remove the sump from the cap of the housing when changing filter cartridges.
(whole house & well units)